1200°C 三區管狀爐 三區擴散爐

Tender

 

1.) 溫度: max 1200℃ 
2.) 內徑: 9.5 x 90 cm (9.5 x 30 cm 為一區,合計三區) 
3.) 溫控系統: 採日本進口最新微電腦PID程式控制,9組程式每組10段, 含時間設定,,並可同時顯示操作及設定溫度 
4.) 內爐體設計:採美國Thermcraft的爐板.爐板材質含Al2O3 99%, element wire 採內覆型爐線覆蓋不露在外.堅固耐用,不易斷裂。 
5.) 主機體與溫控器分離式 
6.) Programmable controllers

Programmable low cost controller with simplified settings which costs. the same as a temperature indicating controller. Pattern switch is easily done by key operation. Two Alarm outputs, Time signal output, RUN output and one Event output. to signal Pattern end output are equipped as standard functions.Number of pattern: 9 (unlinkable between patterns) 
Number of step: 10 steps/pattern
 
Options: Serial communication (RS-485), Setting value digital transmission, etc.

謝謝 台大化學系清大化學系中山環工所 使用

 

三區管狀爐

內徑: Φ50mm

加熱區:300mm 一區,合計長度 900mm

溫度 Max:1200

可通各種氣體,及流量控制

(謝謝核能研究所使用)

三區管狀爐

內徑:Φ150 mm

加熱區:300 mm x 3區,合計 900 mm

溫度控制系統:16段可程式控制 可個別控制溫度

最高溫度:1200

(謝謝中山大學材料所使用)

  


 

 三區擴散爐           

(空氣固相薄膜轉晶製程系統

1.     最高溫度:1200
2.    
進口美國Thermcraf加熱爐
3.    
內徑:Φ250mm x 加熱區長800mm
4.    
外徑:Φ360mm x L900mm
5.    
均溫長度40cm
6.    
均溫度溫差:±1
7.    
前置預熱系統:Φ250mm x 300mm
8.    
石英管:OD 156 x ID 150 x L1350mm
9.    
不鏽鋼真空管件
         a. 進氣端不鏽鋼套1
         b. 排氣端不鏽鋼套1
    
    c.  4通不鏽鋼管件1
         d. 球閥1式及快速接頭1
10.    
真空PUMP
11.    
流量計
12.    
冷卻系統 - 爐外收集冷卻用       
13.    
冰水機 冷卻用

                                                                                             

 

 

Tender

 

 

 

 

 

 

 

感謝中科院訂製

top